The fire extinguishing system of the fire monitor should meet the following functions: electric control fire monitor

1. The large space fire detection system in the automatic fire monitor fire extinguishing system should have the intelligent detection function of sensing flame, reach 100% coverage, and ensure no blind spots and no dead ends.

2. The automatic fire monitor fire extinguishing system should be able to automatically correct the spray point angle of the fire monitor according to the distance and size of the fire point to ensure the accurate positioning of the fire monitor.

3. The fire monitor should be able to perform large-angle rotation adjustments in the horizontal and vertical directions to protect the three-dimensional space within its protection range.

4. Water cannon control can be combined with fire detection and alarm to achieve fixed-point rescue and realize intelligent control. In the control room, you should be able to see the moving image information of the on-site water cannon and the on-site fire-fighting images. Visual image monitoring. When the fire alarm occurs, the system can record automatically through the hard disk video recorder.

Where is the electronic control fire monitor?

5. The automatic fire monitor fire extinguishing system should have on-site control and remote control functions, and have the following control methods:

(1) Automatic control mode: After the front-end detector alarms, the alarm signal is transmitted to the central control system of the fire monitor. After the host analyzes and judges the fire, the fire point is determined. At the same time, the two fire monitors corresponding to the fire area automatically point to the fire point. Automatically start the fire pump, open the electric valve, and spray water to the fire point to extinguish the fire. There is no spray dead angle, and the positioning is accurate. After the system alarms in the automatic state, the water monitor can be activated and start positioning within 30 seconds, and it will not exceed 60 seconds to automatically discharge the water.

(2) The remote control mode of the fire control center: After the front-end detector alarms, the personnel on duty control the fire monitor to aim at the fire point through the manual operation panel in the center of the control room through the color screen that is forced to switch, start the fire pump, and open the electric valve to spray. Water to extinguish the fire.

(3) On-site manual control: When the on-site personnel discover a fire, they can directly control the fire monitor to aim at the fire point through the on-site manual operation panel of the fire monitor, start the fire pump, and open the electric valve to spray water to extinguish the fire.

(4) On-site manual control has priority.

(5) In order to prevent misoperation, the central manual operation panel should have a multi-level safety lock or operation authority setting function.

(6) Using the interface and communication protocol provided by our company, it can be integrated with the conventional automatic fire alarm and linkage control system, and realize the linkage control function of the fire monitor.

(7) Fire monitor linkage function: The water monitor is connected to the automatic fire alarm system. In addition to the water monitor itself for fire detection and automatic fire extinguishing control, the water monitor can also be controlled by the linkage function of the automatic fire alarm system.